Edelbrock 71011 Performer RPM Intake Manifold Chevy - V8 (262-400) 1955-86

{"id":2440372092986,"title":"Edelbrock 2105 Intake Manifold Ford - V8 (332-428 FE) 1957-77","handle":"ede-2105-edelbrock","description":"\u003cp\u003eDesigned for street 332-352-360-390-406-410-427-428 c.i.d. Ford V8's with medium- or low-rise cylinder heads. Intake manifold not equipped with EGR; will not accept stock Motorcraft spread-bore carburetor or fit heavy-duty 361 c.i.d. and 391 c.i.d. Ford truck V8's.\u003c\/p\u003e\n\u003cp\u003eIntake Section Included: Complete\u003c\/p\u003e\n\u003cp\u003eEngine Block Style: Stock\/OEM standard deck\u003c\/p\u003e\n\u003cp\u003eCarburetor Quantity: One\u003c\/p\u003e\n\u003cp\u003eIntake Style: Dual plane\u003c\/p\u003e\n\u003cp\u003eBasic Operating RPM Range: Idle-5,500\u003c\/p\u003e\n\u003cp\u003eIntake Manifold Height: 4.920 in.\u003c\/p\u003e\n\u003cp\u003eIntake Finish: Natural\u003c\/p\u003e\n\u003cp\u003eIntake Material: Aluminum\u003c\/p\u003e\n\u003cp\u003eEGR: No\u003c\/p\u003e\n\u003cp\u003eQuantity: Sold individually.\u003c\/p\u003e\n\u003cp\u003eNotes: Will not accept stock Motorcraft spread-bore carburetor or fit heavy-duty 361 and 391 C.I.D. Ford truck V8 engines. On some models, there are dowel pins in the front valley gasket surface of the engine block. Remove any dowel pins before test fitting or installing the intake manifold. Please see the charts and guides tab for a comparison of square bore vs spread bore.\u003c\/p\u003e\n\u003cp\u003eEdelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.\u003c\/p\u003e","published_at":"2019-06-01T13:09:53-05:00","created_at":"2019-06-01T13:09:53-05:00","vendor":"Edelbrock","type":"Intake Manifolds, Carbureted","tags":["Brand:Edelbrock","Carburetor Mounting:4BBL Square Bore","Carburetor Quantity:One","Engine:Ford - V8 (332-428 FE) 1957-77","Intake Manifolds Carbureted","Intake Material and Finish:Natural Aluminum","Intake Style:Dual Plane","RPM Range: Idle-5500"],"price":50895,"price_min":50895,"price_max":50895,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23281035673658,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EDE2105","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Edelbrock 2105 Intake Manifold Ford - V8 (332-428 FE) 1957-77","public_title":null,"options":["Default Title"],"price":50895,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"085347021055","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2105.jpg?v=1559413088"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2105.jpg?v=1559413088","options":["Title"],"media":[{"alt":null,"id":2090938400826,"position":1,"preview_image":{"aspect_ratio":1.623,"height":154,"width":250,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2105.jpg?v=1559413088"},"aspect_ratio":1.623,"height":154,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2105.jpg?v=1559413088","width":250}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDesigned for street 332-352-360-390-406-410-427-428 c.i.d. Ford V8's with medium- or low-rise cylinder heads. Intake manifold not equipped with EGR; will not accept stock Motorcraft spread-bore carburetor or fit heavy-duty 361 c.i.d. and 391 c.i.d. Ford truck V8's.\u003c\/p\u003e\n\u003cp\u003eIntake Section Included: Complete\u003c\/p\u003e\n\u003cp\u003eEngine Block Style: Stock\/OEM standard deck\u003c\/p\u003e\n\u003cp\u003eCarburetor Quantity: One\u003c\/p\u003e\n\u003cp\u003eIntake Style: Dual plane\u003c\/p\u003e\n\u003cp\u003eBasic Operating RPM Range: Idle-5,500\u003c\/p\u003e\n\u003cp\u003eIntake Manifold Height: 4.920 in.\u003c\/p\u003e\n\u003cp\u003eIntake Finish: Natural\u003c\/p\u003e\n\u003cp\u003eIntake Material: Aluminum\u003c\/p\u003e\n\u003cp\u003eEGR: No\u003c\/p\u003e\n\u003cp\u003eQuantity: Sold individually.\u003c\/p\u003e\n\u003cp\u003eNotes: Will not accept stock Motorcraft spread-bore carburetor or fit heavy-duty 361 and 391 C.I.D. Ford truck V8 engines. On some models, there are dowel pins in the front valley gasket surface of the engine block. Remove any dowel pins before test fitting or installing the intake manifold. Please see the charts and guides tab for a comparison of square bore vs spread bore.\u003c\/p\u003e\n\u003cp\u003eEdelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.\u003c\/p\u003e"}

{"id":2440367341626,"title":"Edelbrock 7159 Performer RPM Intake Manifold Chevy - V8 (348-409) 1958-65 \"W\" Series","handle":"ede-7159-edelbrock","description":"\u003cp\u003eThese Performer RPM intake manifolds are designed to fit 1958-1965 Chevrolet 348\/409 \"W\" big-block engines. Two versions are available, one for small-port cast iron factory heads and one for factory large port or with our Performer RPM \"W\"-series heads #60809 or #60819. They both deliver improved performance in the mid to high rpm range when combined with Edelbrock carburetor's. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as #4803. For square-bore carburetors only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Section Included: Complete \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngine Block Style: Stock\/OEM standard deck \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarburetor Quantity: One \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Style: Dual plane \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBasic Operating RPM Range: 1,500-6,500 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Manifold Height: 4.620 in. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Finish: Natural \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Material: Aluminum \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEGR: No \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity: Sold individually. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes: Includes front mount chrome oil filler tube and push-in breather cap. \u003c\/strong\u003e\u003c\/p\u003e","published_at":"2019-06-01T13:08:02-05:00","created_at":"2019-06-01T13:08:02-05:00","vendor":"Edelbrock","type":"Intake Manifolds, Carbureted","tags":["Brand:Edelbrock","Carburetor Mounting:4BBL Square Bore","Carburetor Quantity:One","Engine:Chevy - V8 (348-409) 1958-65 \"W\" Series","Intake Manifolds Carbureted","Intake Material and Finish:Natural Aluminum","Intake Style:Dual Plane","RPM Range:1500-6500"],"price":56295,"price_min":56295,"price_max":56295,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23281030398010,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EDE7159","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Edelbrock 7159 Performer RPM Intake Manifold Chevy - V8 (348-409) 1958-65 \"W\" Series","public_title":null,"options":["Default Title"],"price":56295,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"085347071593","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/7159.jpg?v=1559417603"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/7159.jpg?v=1559417603","options":["Title"],"media":[{"alt":null,"id":2090971103290,"position":1,"preview_image":{"aspect_ratio":1.0,"height":250,"width":250,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/7159.jpg?v=1559417603"},"aspect_ratio":1.0,"height":250,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/7159.jpg?v=1559417603","width":250}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThese Performer RPM intake manifolds are designed to fit 1958-1965 Chevrolet 348\/409 \"W\" big-block engines. Two versions are available, one for small-port cast iron factory heads and one for factory large port or with our Performer RPM \"W\"-series heads #60809 or #60819. They both deliver improved performance in the mid to high rpm range when combined with Edelbrock carburetor's. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as #4803. For square-bore carburetors only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Section Included: Complete \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngine Block Style: Stock\/OEM standard deck \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarburetor Quantity: One \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Style: Dual plane \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBasic Operating RPM Range: 1,500-6,500 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Manifold Height: 4.620 in. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Finish: Natural \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Material: Aluminum \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEGR: No \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity: Sold individually. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes: Includes front mount chrome oil filler tube and push-in breather cap. \u003c\/strong\u003e\u003c\/p\u003e"}

{"id":2440367013946,"title":"Edelbrock 7501 Performer RPM Air-Gap Intake Manifold Chevy - V8 (262-400) 1955-86","handle":"ede-7501-edelbrock","description":"\u003cp\u003eDesigned for 1955-86 262-400 c.i.d. Chevrolet V8's, the award-winning RPM Air-Gap intake manifold incorporates the same race-winning technology that's used on our Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Includes rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all 1976 and later alternator and A\/C brackets for the street. The heater outlet boss is angled for proper fit over the valve cover. The temp sensor boss clears all waternecks. For square-bore carburetors only. No provision for exhaust- heated chokes and no exhaust crossover. Not for 1987 and later cast iron heads and \u003cstrong\u003ewill not fit under stock Corvette hood\u003c\/strong\u003e. Available with satin, polished, black powder coated or EnduraShine finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Section Included: Complete \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngine Block Style: Stock\/OEM standard deck \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarburetor Quantity: One \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Style: Dual plane \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBasic Operating RPM Range: 1,500-6,500 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Manifold Height: 4.720 in. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Finish: Natural \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Material: Aluminum \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEGR: No \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity: Sold individually. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes: Nitrous bosses, rear water outlets, two distributor clamp locations. Temperature sending unit boss clears all water necks. No provision for exhaust-heated chokes. No exhaust crossover. \u003c\/strong\u003e\u003c\/p\u003e","published_at":"2019-06-01T13:07:56-05:00","created_at":"2019-06-01T13:07:56-05:00","vendor":"Edelbrock","type":"Intake Manifolds, Carbureted","tags":["Brand:Edelbrock","Carburetor Mounting:4BBL Square Bore","Carburetor Quantity:One","Engine:Chevy - V8 (262-400) 1955-86","Intake Manifolds Carbureted","Intake Material and Finish:Natural Aluminum","Intake Style:Dual Plane","RPM Range:1500-6500"],"price":34395,"price_min":34395,"price_max":34395,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23281030070330,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EDE7501","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Edelbrock 7501 Performer RPM Air-Gap Intake Manifold Chevy - V8 (262-400) 1955-86","public_title":null,"options":["Default Title"],"price":34395,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"085347075010","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/7501.jpg?v=1559417826"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/7501.jpg?v=1559417826","options":["Title"],"media":[{"alt":null,"id":2090972315706,"position":1,"preview_image":{"aspect_ratio":1.678,"height":149,"width":250,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/7501.jpg?v=1559417826"},"aspect_ratio":1.678,"height":149,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/7501.jpg?v=1559417826","width":250}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDesigned for 1955-86 262-400 c.i.d. Chevrolet V8's, the award-winning RPM Air-Gap intake manifold incorporates the same race-winning technology that's used on our Victor Series competition intakes. The air-gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Includes rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all 1976 and later alternator and A\/C brackets for the street. The heater outlet boss is angled for proper fit over the valve cover. The temp sensor boss clears all waternecks. For square-bore carburetors only. No provision for exhaust- heated chokes and no exhaust crossover. Not for 1987 and later cast iron heads and \u003cstrong\u003ewill not fit under stock Corvette hood\u003c\/strong\u003e. Available with satin, polished, black powder coated or EnduraShine finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Section Included: Complete \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngine Block Style: Stock\/OEM standard deck \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarburetor Quantity: One \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Style: Dual plane \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBasic Operating RPM Range: 1,500-6,500 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Manifold Height: 4.720 in. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Finish: Natural \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Material: Aluminum \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEGR: No \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity: Sold individually. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes: Nitrous bosses, rear water outlets, two distributor clamp locations. Temperature sending unit boss clears all water necks. No provision for exhaust-heated chokes. No exhaust crossover. \u003c\/strong\u003e\u003c\/p\u003e"}

{"id":2440370192442,"title":"Edelbrock 2892 Super Victor Intake Manifold Chevy - V8 (262-400) 1955-86","handle":"ede-2892-edelbrock","description":"\u003cp\u003eThe Victor Jr. Sportsman 2V intake manifold #2901 is a dedicated design for the 2V racer and provides outstanding performance from 3500 to 7000 rpm. The runners are sized especially for 2V racing engines for the ultimate combination of torque and horsepower with better fuel distribution. An extra tall carburetor pad eliminates the need for spacers, and rear water outlets allow for a four corner coolant flow path if desired. It features dual distributor clamp locations, and port exits are sized to match cast iron Chevrolet Bowtie heads. The Victor Jr. Sportsman 2V #2912 for Vortec heads has all the features of #2901 for the racer using the popular GM (Vortec L31) cast iron cylinder heads. Both manifolds accept standard restrictor plates and carb adapters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Section Included:Complete\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngine Block Style:Stock\/OEM standard deck\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarburetor Quantity:One\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Style:Single plane\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBasic Operating RPM Range:4,000-8,000\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Manifold Height:6.560 in.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Finish:Natural\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Material:Aluminum\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEGR:No\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:Sold individually.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEdelbrock Super Victor intake manifolds are arguably the most popular and flexible manifolds in racing today. You'll find these single-plane manifolds on oval tracks, in drag racing, and on NASCAR engines--anywhere that maximum horsepower and torque are needed. The extended, constant cross-sectional area of the runners produces more torque across the midrange--from 3,500 up to 8,500 rpm in most instances. So, they deliver great throttle response off of the corners in oval track racing and improved 60 ft. times in drag racing. Their direct \"line-of-sight\" flow path provides maximum flow and there's plenty of material for port matching. They're also ideal for alcohol use.\u003c\/p\u003e","published_at":"2019-06-01T13:09:09-05:00","created_at":"2019-06-01T13:09:09-05:00","vendor":"Edelbrock","type":"Intake Manifolds, Carbureted","tags":["Brand:Edelbrock","Carburetor Mounting:4BBL Square Bore","Carburetor Quantity:One","Engine:Chevy - V8 (262-400) 1955-86","Intake Manifolds Carbureted","Intake Material and Finish:Natural Aluminum","Intake Style:Single Plane","RPM Range:Race Intakes 4000+"],"price":58895,"price_min":58895,"price_max":58895,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23281033707578,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EDE2892","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Edelbrock 2892 Super Victor Intake Manifold Chevy - V8 (262-400) 1955-86","public_title":null,"options":["Default Title"],"price":58895,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"085347028924","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2892.jpg?v=1559414651"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2892.jpg?v=1559414651","options":["Title"],"media":[{"alt":null,"id":2090950754362,"position":1,"preview_image":{"aspect_ratio":1.0,"height":250,"width":250,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2892.jpg?v=1559414651"},"aspect_ratio":1.0,"height":250,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2892.jpg?v=1559414651","width":250}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThe Victor Jr. Sportsman 2V intake manifold #2901 is a dedicated design for the 2V racer and provides outstanding performance from 3500 to 7000 rpm. The runners are sized especially for 2V racing engines for the ultimate combination of torque and horsepower with better fuel distribution. An extra tall carburetor pad eliminates the need for spacers, and rear water outlets allow for a four corner coolant flow path if desired. It features dual distributor clamp locations, and port exits are sized to match cast iron Chevrolet Bowtie heads. The Victor Jr. Sportsman 2V #2912 for Vortec heads has all the features of #2901 for the racer using the popular GM (Vortec L31) cast iron cylinder heads. Both manifolds accept standard restrictor plates and carb adapters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Section Included:Complete\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngine Block Style:Stock\/OEM standard deck\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarburetor Quantity:One\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Style:Single plane\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBasic Operating RPM Range:4,000-8,000\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Manifold Height:6.560 in.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Finish:Natural\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Material:Aluminum\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEGR:No\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:Sold individually.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEdelbrock Super Victor intake manifolds are arguably the most popular and flexible manifolds in racing today. You'll find these single-plane manifolds on oval tracks, in drag racing, and on NASCAR engines--anywhere that maximum horsepower and torque are needed. The extended, constant cross-sectional area of the runners produces more torque across the midrange--from 3,500 up to 8,500 rpm in most instances. So, they deliver great throttle response off of the corners in oval track racing and improved 60 ft. times in drag racing. Their direct \"line-of-sight\" flow path provides maximum flow and there's plenty of material for port matching. They're also ideal for alcohol use.\u003c\/p\u003e"}

{"id":2440370126906,"title":"Edelbrock 2896 Super Victor II Intake Manifold Chevy - V8 (396-454) 1965-1990","handle":"ede-2896-edelbrock","description":"\u003cp\u003eDesigned for competition 396-502 big-block Chevys. #2902 fits rectangular-port heads and #72902 features out-of-the-box pre-assembled direct port nitrous system ready to bolt on and go! Intake manifold #2904 fits large oval-port heads (1975 \u0026amp; earlier). These intakes are designed to optimize the flow characteristics of an 850 cfm standard flange carb. Features include extended runner dividers, smaller plenum chambers and unique runner design for better 60 foot times and max power from 3500 to 7500 rpm. These manifolds are especially suited to 502 c.i.d. and smaller competition engines. This manifold is cast with 3\/8\" more material in the corners of the ports for a final radius of 3\/4\". This extra material allows for custom port matching for use with various cylinder head applications. It is designed to be matched with our Edelbrock\/Musi Victor 24?? Pro-Port CNC heads #61419 or #61409 for 950+ hp out-of-the-box potential! Victor Jr. 454-R #2902 will fit Edelbrock Victor race heads #77609 and Victor 24?? #77409, #77459, #77429, #77479 and #77489.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Section Included:Complete\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngine Block Style:Stock\/OEM standard deck\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarburetor Quantity:One\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Style:Single plane\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBasic Operating RPM Range:3,500-8,000\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Manifold Height:7.560 in.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Finish:Natural\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Material:Aluminum\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEGR:No\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:Sold individually.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:Fits 9.800 in. deck height engine blocks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEdelbrock Super Victor II intake manifolds are designed for use with large cubic inch big-block Chevy engines using the latest design conventional port heads. They're ideal for any 1,000+ horsepower drag race engine with high air flow requirements. Slip collar distributors are recommended for these manifolds when used on short deck blocks. All manifolds have extra-large carburetor outer flanges with a 5 x 5 in. opening to fit high flow carburetors and throttle stops. Modern casting techniques create smooth, thin, extended divider walls for \"out of the box\" performance, just port match and go!\u003c\/p\u003e","published_at":"2019-06-01T13:09:07-05:00","created_at":"2019-06-01T13:09:08-05:00","vendor":"Edelbrock","type":"Intake Manifolds, Carbureted","tags":["Brand:Edelbrock","Carburetor Mounting:4BBL Square Bore","Carburetor Quantity:One","Engine:Chevy - V8 (396-454) 1965-1990","Intake Manifolds Carbureted","Intake Material and Finish:Natural Aluminum","Intake Style:Single Plane","RPM Range:3500-8000"],"price":76595,"price_min":76595,"price_max":76595,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23281033642042,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EDE2896","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Edelbrock 2896 Super Victor II Intake Manifold Chevy - V8 (396-454) 1965-1990","public_title":null,"options":["Default Title"],"price":76595,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"085347028962","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2896.jpg?v=1559414691"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2896.jpg?v=1559414691","options":["Title"],"media":[{"alt":null,"id":2090950983738,"position":1,"preview_image":{"aspect_ratio":1.894,"height":132,"width":250,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2896.jpg?v=1559414691"},"aspect_ratio":1.894,"height":132,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2896.jpg?v=1559414691","width":250}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDesigned for competition 396-502 big-block Chevys. #2902 fits rectangular-port heads and #72902 features out-of-the-box pre-assembled direct port nitrous system ready to bolt on and go! Intake manifold #2904 fits large oval-port heads (1975 \u0026amp; earlier). These intakes are designed to optimize the flow characteristics of an 850 cfm standard flange carb. Features include extended runner dividers, smaller plenum chambers and unique runner design for better 60 foot times and max power from 3500 to 7500 rpm. These manifolds are especially suited to 502 c.i.d. and smaller competition engines. This manifold is cast with 3\/8\" more material in the corners of the ports for a final radius of 3\/4\". This extra material allows for custom port matching for use with various cylinder head applications. It is designed to be matched with our Edelbrock\/Musi Victor 24?? Pro-Port CNC heads #61419 or #61409 for 950+ hp out-of-the-box potential! Victor Jr. 454-R #2902 will fit Edelbrock Victor race heads #77609 and Victor 24?? #77409, #77459, #77429, #77479 and #77489.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Section Included:Complete\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngine Block Style:Stock\/OEM standard deck\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarburetor Quantity:One\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Style:Single plane\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBasic Operating RPM Range:3,500-8,000\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Manifold Height:7.560 in.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Finish:Natural\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Material:Aluminum\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEGR:No\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:Sold individually.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:Fits 9.800 in. deck height engine blocks.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEdelbrock Super Victor II intake manifolds are designed for use with large cubic inch big-block Chevy engines using the latest design conventional port heads. They're ideal for any 1,000+ horsepower drag race engine with high air flow requirements. Slip collar distributors are recommended for these manifolds when used on short deck blocks. All manifolds have extra-large carburetor outer flanges with a 5 x 5 in. opening to fit high flow carburetors and throttle stops. Modern casting techniques create smooth, thin, extended divider walls for \"out of the box\" performance, just port match and go!\u003c\/p\u003e"}

{"id":2440366587962,"title":"Edelbrock 7562 Performer RPM Air-Gap Intake Manifold Chevy - V8 (396-454) 1965-1990","handle":"ede-7562-edelbrock","description":"\u003cp\u003eDesigned for street 396-502 c.i.d. Chevrolet V8's with high-performance rectangular-port heads, the RPM Air-Gap intake manifold incorporates our race-winning technology. The open air space separates the runners from the hot engine oil, and as a result, the air\/fuel mixture stays cooler for a denser charge and more power. Includes rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all late model alternator and A\/C brackets for the street. For square-bore carbs only. No provision for exhaust heated chokes and no exhaust crossover. Available with satin, polished or EnduraShine finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Section Included: Complete \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngine Block Style: Stock\/OEM standard deck \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarburetor Quantity: One \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Style: Dual plane \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBasic Operating RPM Range: 1,500-6,500 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Manifold Height: 5.220 in. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Finish: Natural \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Material: Aluminum \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEGR: No \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity: Sold individually. \u003c\/strong\u003e\u003c\/p\u003e","published_at":"2019-06-01T13:07:48-05:00","created_at":"2019-06-01T13:07:48-05:00","vendor":"Edelbrock","type":"Intake Manifolds, Carbureted","tags":["Brand:Edelbrock","Carburetor Mounting:4BBL Square Bore","Carburetor Quantity:One","Engine:Chevy - V8 (396-454) 1965-1990","Intake Manifolds Carbureted","Intake Material and Finish:Natural Aluminum","Intake Style:Dual Plane","RPM Range:1500-6500"],"price":44495,"price_min":44495,"price_max":44495,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23281029644346,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EDE7562","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Edelbrock 7562 Performer RPM Air-Gap Intake Manifold Chevy - V8 (396-454) 1965-1990","public_title":null,"options":["Default Title"],"price":44495,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"085347075621","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/7562.jpg?v=1559418302"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/7562.jpg?v=1559418302","options":["Title"],"media":[{"alt":null,"id":2090975002682,"position":1,"preview_image":{"aspect_ratio":1.0,"height":250,"width":250,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/7562.jpg?v=1559418302"},"aspect_ratio":1.0,"height":250,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/7562.jpg?v=1559418302","width":250}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDesigned for street 396-502 c.i.d. Chevrolet V8's with high-performance rectangular-port heads, the RPM Air-Gap intake manifold incorporates our race-winning technology. The open air space separates the runners from the hot engine oil, and as a result, the air\/fuel mixture stays cooler for a denser charge and more power. Includes rear water outlets, two distributor clamp locations and nitrous bosses. Accepts all late model alternator and A\/C brackets for the street. For square-bore carbs only. No provision for exhaust heated chokes and no exhaust crossover. Available with satin, polished or EnduraShine finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Section Included: Complete \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngine Block Style: Stock\/OEM standard deck \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarburetor Quantity: One \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Style: Dual plane \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBasic Operating RPM Range: 1,500-6,500 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Manifold Height: 5.220 in. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Finish: Natural \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Material: Aluminum \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEGR: No \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity: Sold individually. \u003c\/strong\u003e\u003c\/p\u003e"}

{"id":2440366424122,"title":"Edelbrock 7581 Performer RPM Air-Gap Intake Manifold Ford - V8 (351W) 1969-97","handle":"ede-7581-edelbrock","description":"\u003cp\u003eDesigned for street and high performance 351-400+ c.i.d. 351W Ford V8's, the RPM Air-Gap incorporates the same race-winning design that's been used on our Victor Series competition intakes for decades. The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Larger cross sectional area and a taller carb flange than #7181 for compatibility with large displacement, stroker 351W based engines. Includes bosses for nitrous and rear water crossover. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Section Included: Complete \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngine Block Style: Stock\/OEM standard deck \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarburetor Quantity: One \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Style: Dual plane \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBasic Operating RPM Range: 1,500-6,500 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Manifold Height: 5.750 in. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Finish: Natural \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Material: Aluminum \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEGR: No \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity: Sold individually. \u003c\/strong\u003e\u003c\/p\u003e","published_at":"2019-06-01T13:07:45-05:00","created_at":"2019-06-01T13:07:45-05:00","vendor":"Edelbrock","type":"Intake Manifolds, Carbureted","tags":["Brand:Edelbrock","Carburetor Mounting:4BBL Square Bore","Carburetor Quantity:One","Engine:Ford - V8 (351W) 1969-97","Intake Manifolds Carbureted","Intake Material and Finish:Natural Aluminum","Intake Style:Dual Plane","RPM Range:1500-6500"],"price":44095,"price_min":44095,"price_max":44095,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23281029480506,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EDE7581","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Edelbrock 7581 Performer RPM Air-Gap Intake Manifold Ford - V8 (351W) 1969-97","public_title":null,"options":["Default Title"],"price":44095,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"085347075812","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/7581.jpg?v=1559418543"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/7581.jpg?v=1559418543","options":["Title"],"media":[{"alt":null,"id":2090976510010,"position":1,"preview_image":{"aspect_ratio":1.381,"height":181,"width":250,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/7581.jpg?v=1559418543"},"aspect_ratio":1.381,"height":181,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/7581.jpg?v=1559418543","width":250}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDesigned for street and high performance 351-400+ c.i.d. 351W Ford V8's, the RPM Air-Gap incorporates the same race-winning design that's been used on our Victor Series competition intakes for decades. The Air-Gap design features an open air space that separates the runners from the hot engine oil resulting in a cooler, denser charge for more power. Larger cross sectional area and a taller carb flange than #7181 for compatibility with large displacement, stroker 351W based engines. Includes bosses for nitrous and rear water crossover. Edelbrock carbs will work with Ford automatic overdrive trans (AOD) when used with Lokar bracket SRK-4000, for more info call (865) 966-2269 or go to www.lokar.com.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Section Included: Complete \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngine Block Style: Stock\/OEM standard deck \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarburetor Quantity: One \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Style: Dual plane \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBasic Operating RPM Range: 1,500-6,500 \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Manifold Height: 5.750 in. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Finish: Natural \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Material: Aluminum \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEGR: No \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity: Sold individually. \u003c\/strong\u003e\u003c\/p\u003e"}

{"id":2440371961914,"title":"Edelbrock 2115 Intake Manifold Cadillac - V8 (7.7L) 1968-76","handle":"ede-2115-edelbrock","description":"\u003cp\u003eThis Performer intake manifold is designed for 1968-76 Cadillac 472 and 500 cubic-inch engines. For either square or spread-bore carbs, #2115 is the first intake designed specifically for high-performance Cadillacs using standard heads. Like all Edelbrock Performers, this manifold increases torque and horsepower from idle to 5500 rpm. The broad power band is ideal for high-performance street and engine swap applications. Specs on this non-EGR manifold include a carb pad height that's 3\" taller than stock. Dropped divider wall evens air\/fuel ratio throughout the rpm range. Stock air conditioning compressor will not fit.\u003c\/p\u003e\n\u003cp\u003eIntake Section Included: Complete\u003c\/p\u003e\n\u003cp\u003eEngine Block Style: Stock\/OEM standard deck\u003c\/p\u003e\n\u003cp\u003eCarburetor Quantity: One\u003c\/p\u003e\n\u003cp\u003eIntake Style: Dual plane\u003c\/p\u003e\n\u003cp\u003eBasic Operating RPM Range: Idle-5,500\u003c\/p\u003e\n\u003cp\u003eIntake Manifold Height: 3.840 in.\u003c\/p\u003e\n\u003cp\u003eIntake Finish: Natural\u003c\/p\u003e\n\u003cp\u003eIntake Material: Aluminum\u003c\/p\u003e\n\u003cp\u003eEGR: No\u003c\/p\u003e\n\u003cp\u003eQuantity: Sold individually.\u003c\/p\u003e\n\u003cp\u003eEdelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.\u003c\/p\u003e","published_at":"2019-06-01T13:09:50-05:00","created_at":"2019-06-01T13:09:50-05:00","vendor":"Edelbrock","type":"Intake Manifolds, Carbureted","tags":["Brand:Edelbrock","Carburetor Mounting:4BBL Square\/Spread Bore","Carburetor Quantity:One","Engine:Cadillac - V8 (7.7L) 1968-76","Intake Manifolds Carbureted","Intake Material and Finish:Natural Aluminum","Intake Style:Dual Plane","RPM Range: Idle-5500"],"price":51095,"price_min":51095,"price_max":51095,"available":true,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23281035575354,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EDE2115","requires_shipping":true,"taxable":true,"featured_image":null,"available":true,"name":"Edelbrock 2115 Intake Manifold Cadillac - V8 (7.7L) 1968-76","public_title":null,"options":["Default Title"],"price":51095,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"085347021154","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2115.jpg?v=1559413152"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2115.jpg?v=1559413152","options":["Title"],"media":[{"alt":null,"id":2090938957882,"position":1,"preview_image":{"aspect_ratio":1.534,"height":163,"width":250,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2115.jpg?v=1559413152"},"aspect_ratio":1.534,"height":163,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2115.jpg?v=1559413152","width":250}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eThis Performer intake manifold is designed for 1968-76 Cadillac 472 and 500 cubic-inch engines. For either square or spread-bore carbs, #2115 is the first intake designed specifically for high-performance Cadillacs using standard heads. Like all Edelbrock Performers, this manifold increases torque and horsepower from idle to 5500 rpm. The broad power band is ideal for high-performance street and engine swap applications. Specs on this non-EGR manifold include a carb pad height that's 3\" taller than stock. Dropped divider wall evens air\/fuel ratio throughout the rpm range. Stock air conditioning compressor will not fit.\u003c\/p\u003e\n\u003cp\u003eIntake Section Included: Complete\u003c\/p\u003e\n\u003cp\u003eEngine Block Style: Stock\/OEM standard deck\u003c\/p\u003e\n\u003cp\u003eCarburetor Quantity: One\u003c\/p\u003e\n\u003cp\u003eIntake Style: Dual plane\u003c\/p\u003e\n\u003cp\u003eBasic Operating RPM Range: Idle-5,500\u003c\/p\u003e\n\u003cp\u003eIntake Manifold Height: 3.840 in.\u003c\/p\u003e\n\u003cp\u003eIntake Finish: Natural\u003c\/p\u003e\n\u003cp\u003eIntake Material: Aluminum\u003c\/p\u003e\n\u003cp\u003eEGR: No\u003c\/p\u003e\n\u003cp\u003eQuantity: Sold individually.\u003c\/p\u003e\n\u003cp\u003eEdelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.\u003c\/p\u003e"}

{"id":2440371732538,"title":"Edelbrock 2161 Performer Intake Manifold Chevy - V8 (396-454) 1965-1990","handle":"ede-2161-edelbrock","description":"\u003cp\u003eDesigned for street 396-502 c.i.d. big-block Chevy V8's using general duty oval-port cylinder heads. Intake manifold #2561 is for marine applications and features brass lined water passage and brass flange inserts to cover rear water openings. Will not fit under hood of Corvette without hood modifications. Will not fit \"tall block\" V8's. May be used with OEM or aftermarket carbs. Will fit 1965-90 oval port heads.\u003c\/p\u003e\n\u003cp\u003eIntake Section Included: Complete\u003c\/p\u003e\n\u003cp\u003eEngine Block Style: Stock\/OEM standard deck\u003c\/p\u003e\n\u003cp\u003eCarburetor Quantity: One\u003c\/p\u003e\n\u003cp\u003eIntake Style: Dual plane\u003c\/p\u003e\n\u003cp\u003eBasic Operating RPM Range: Idle-5,500\u003c\/p\u003e\n\u003cp\u003eIntake Manifold Height: 4.850 in.\u003c\/p\u003e\n\u003cp\u003eIntake Finish: Natural\u003c\/p\u003e\n\u003cp\u003eIntake Material: Aluminum\u003c\/p\u003e\n\u003cp\u003eEGR: No\u003c\/p\u003e\n\u003cp\u003eQuantity: Sold individually.\u003c\/p\u003e\n\u003cp\u003eNotes: Will not fit under the hood of Corvette without modifications. General duty oval-port cylinder heads. Port exit dimensions: 1.70 inch wide x 1.68 inch tall. Distributor is centered by the engine block. Hole measures 1.400 in. diameter.\u003c\/p\u003e\n\u003cp\u003eEdelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.\u003c\/p\u003e","published_at":"2019-06-01T13:09:45-05:00","created_at":"2019-06-01T13:09:45-05:00","vendor":"Edelbrock","type":"Intake Manifolds, Carbureted","tags":["Brand:Edelbrock","Carburetor Mounting:4BBL Square\/Spread Bore","Carburetor Quantity:One","Engine:Chevy - V8 (396-454) 1965-1990","Intake Manifolds Carbureted","Intake Material and Finish:Natural Aluminum","Intake Style:Dual Plane","RPM Range: Idle-5500"],"price":35795,"price_min":35795,"price_max":35795,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23281035345978,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EDE2161","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Edelbrock 2161 Performer Intake Manifold Chevy - V8 (396-454) 1965-1990","public_title":null,"options":["Default Title"],"price":35795,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"085347021611","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2161.jpg?v=1559413613"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2161.jpg?v=1559413613","options":["Title"],"media":[{"alt":null,"id":2090941087802,"position":1,"preview_image":{"aspect_ratio":0.904,"height":250,"width":226,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2161.jpg?v=1559413613"},"aspect_ratio":0.904,"height":250,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2161.jpg?v=1559413613","width":226}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDesigned for street 396-502 c.i.d. big-block Chevy V8's using general duty oval-port cylinder heads. Intake manifold #2561 is for marine applications and features brass lined water passage and brass flange inserts to cover rear water openings. Will not fit under hood of Corvette without hood modifications. Will not fit \"tall block\" V8's. May be used with OEM or aftermarket carbs. Will fit 1965-90 oval port heads.\u003c\/p\u003e\n\u003cp\u003eIntake Section Included: Complete\u003c\/p\u003e\n\u003cp\u003eEngine Block Style: Stock\/OEM standard deck\u003c\/p\u003e\n\u003cp\u003eCarburetor Quantity: One\u003c\/p\u003e\n\u003cp\u003eIntake Style: Dual plane\u003c\/p\u003e\n\u003cp\u003eBasic Operating RPM Range: Idle-5,500\u003c\/p\u003e\n\u003cp\u003eIntake Manifold Height: 4.850 in.\u003c\/p\u003e\n\u003cp\u003eIntake Finish: Natural\u003c\/p\u003e\n\u003cp\u003eIntake Material: Aluminum\u003c\/p\u003e\n\u003cp\u003eEGR: No\u003c\/p\u003e\n\u003cp\u003eQuantity: Sold individually.\u003c\/p\u003e\n\u003cp\u003eNotes: Will not fit under the hood of Corvette without modifications. General duty oval-port cylinder heads. Port exit dimensions: 1.70 inch wide x 1.68 inch tall. Distributor is centered by the engine block. Hole measures 1.400 in. diameter.\u003c\/p\u003e\n\u003cp\u003eEdelbrock Performer intake manifolds are low-rise, dual-plane designs with patented runner tuning and a 180 degree firing order that you won't find with the competition. This combination boosts torque over a wide rpm range, from idle to 5,500 rpm. These manifolds also deliver improved throttle response over stock intakes and are available in both EGR and non-EGR style.\u003c\/p\u003e"}

{"id":2440371077178,"title":"Edelbrock 2703 Performer EPS Intake Manifold Chevy - V8 (262-400) 1955-86","handle":"ede-2703-edelbrock","description":"\u003cp\u003eDesigned for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that's \"tuned\" for peak torque at 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft-lbs. of torque for more performance where you need it most. Performer EPS manifold #2703 combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers. #2703 has the same performance features as the Performer EPS #2701. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as #4803. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. Also available with choice of four finishes. Will not fit under stock Corvette hood. Available with satin, polished, black or EnduraShine?????? finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Section Included:\u003c\/strong\u003eComplete\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngine Block Style:\u003c\/strong\u003eStock\/OEM standard deck\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarburetor Quantity:\u003c\/strong\u003eOne\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Style:\u003c\/strong\u003eDual plane\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBasic Operating RPM Range:\u003c\/strong\u003eIdle-5,500\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Manifold Height:\u003c\/strong\u003e4.270 in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Finish:\u003c\/strong\u003eNatural\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Material:\u003c\/strong\u003eAluminum\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEGR:\u003c\/strong\u003eNo\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003eSold individually.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003eIncludes oil fill tube and matching breather. Not compatible with late model thermostat housings due to oil fill tube clearance. Please see the charts and guides tab for a comparison of square bore vs spread bore.\u003c\/p\u003e\n\u003cp\u003eDual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer series square bore or Thunder series AVS carburetors. Dyno tests showed an extra 5 hp and 9 ft.-lbs. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000-4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!\u003c\/p\u003e","published_at":"2019-06-01T13:09:31-05:00","created_at":"2019-06-01T13:09:31-05:00","vendor":"Edelbrock","type":"Intake Manifolds, Carbureted","tags":["Brand:Edelbrock","Carburetor Mounting:4BBL Square Bore","Carburetor Quantity:One","Engine:Chevy - V8 (262-400) 1955-86","Intake Manifolds Carbureted","Intake Material and Finish:Natural Aluminum","Intake Style:Dual Plane","RPM Range: Idle-5500"],"price":30895,"price_min":30895,"price_max":30895,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23281034592314,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EDE2703","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Edelbrock 2703 Performer EPS Intake Manifold Chevy - V8 (262-400) 1955-86","public_title":null,"options":["Default Title"],"price":30895,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"085347027033","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2703.jpg?v=1559414067"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2703.jpg?v=1559414067","options":["Title"],"media":[{"alt":null,"id":2090945478714,"position":1,"preview_image":{"aspect_ratio":1.0,"height":1500,"width":1500,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2703.jpg?v=1559414067"},"aspect_ratio":1.0,"height":1500,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2703.jpg?v=1559414067","width":1500}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDesigned for 1986 and earlier 262-400 cubic-inch Chevys, the Performer EPS dual-plane intake manifold is optimized to deliver superior performance with Edelbrock square-bore Performer Series or Thunder Series AVS carburetors. This small-block Chevy manifold has a runner design that's \"tuned\" for peak torque at 3500 rpm on a 350-inch engine and it's ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Edelbrock Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the increases averaged 5+ ft-lbs. of torque for more performance where you need it most. Performer EPS manifold #2703 combines a modern runner design with a front mounted oil fill tube for those who want the vintage look of our Classic valve covers with no breathers. #2703 has the same performance features as the Performer EPS #2701. Includes Oil Fill Tube (not installed) and matching push-in breather cap. The Oil Fill Tube and Breather are also available separately as #4803. Match with a dependable Edelbrock square-bore carburetor for maximum performance gains. Also available with choice of four finishes. Will not fit under stock Corvette hood. Available with satin, polished, black or EnduraShine?????? finish.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Section Included:\u003c\/strong\u003eComplete\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngine Block Style:\u003c\/strong\u003eStock\/OEM standard deck\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarburetor Quantity:\u003c\/strong\u003eOne\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Style:\u003c\/strong\u003eDual plane\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBasic Operating RPM Range:\u003c\/strong\u003eIdle-5,500\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Manifold Height:\u003c\/strong\u003e4.270 in.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Finish:\u003c\/strong\u003eNatural\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Material:\u003c\/strong\u003eAluminum\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEGR:\u003c\/strong\u003eNo\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:\u003c\/strong\u003eSold individually.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:\u003c\/strong\u003eIncludes oil fill tube and matching breather. Not compatible with late model thermostat housings due to oil fill tube clearance. Please see the charts and guides tab for a comparison of square bore vs spread bore.\u003c\/p\u003e\n\u003cp\u003eDual-plane Edelbrock Performer EPS intake manifolds deliver dyno-proven horsepower gains from idle to 5,500 rpm, when used with Edelbrock's Performer series square bore or Thunder series AVS carburetors. Dyno tests showed an extra 5 hp and 9 ft.-lbs. over their own Performer manifolds. The secret is in the runner design, which is tuned to produce substantial torque increases in the 3,000-4,500 rpm range--with peak torque at 3,500 rpm. That's power where you need it the most!\u003c\/p\u003e"}

{"id":2440370683962,"title":"Edelbrock 2826 Super Victor Intake Manifold Chevy - V8 (6.2L) 2008-14 LS3","handle":"ede-2826-edelbrock","description":"\u003cp\u003eDesigned for Gen IV LS engines equipped with LS3 cylinder heads, these new Super Victor intake manifolds are ideal for anyone building a 700+ hp carbureted or EFI large displacement racing engine operating between 3,500 - 7,500 rpm.\u003c\/p\u003e\n\u003cp\u003eThese new Super Victor intake manifolds are designed with 24% larger runners than our Victor Jr. #28457 along with a larger 4500 style plenum. The large plenum makes these intake manifolds ideal for nitrous and forced induction applications. They also feature tapered runners for increased flow at high rpm. Available with a 4150 or 4500 series carburetor flange. The Super Victor 4500 series manifolds can accommodate bores up 2.25\". Super Victor #28215 and #28265 include machined fuel injector bosses. A carburetor mounted style throttle bracket is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Section Included:Complete\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngine Block Style:Stock\/OEM standard deck\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarburetor Quantity:One\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Style:Single plane\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBasic Operating RPM Range:3,500-7,500\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Manifold Height:7.670 in.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Finish:Natural\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Material:Aluminum\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEGR:No\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:Sold individually.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEdelbrock Super Victor intake manifolds are arguably the most popular and flexible manifolds in racing today. You'll find these single-plane manifolds on oval tracks, in drag racing, and on NASCAR engines--anywhere that maximum horsepower and torque are needed. The extended, constant cross-sectional area of the runners produces more torque across the midrange--from 3,500 up to 8,500 rpm in most instances. So, they deliver great throttle response off of the corners in oval track racing and improved 60 ft. times in drag racing. Their direct \"line-of-sight\" flow path provides maximum flow and there's plenty of material for port matching. They're also ideal for alcohol use.\u003c\/p\u003e","published_at":"2019-06-01T13:09:20-05:00","created_at":"2019-06-01T13:09:20-05:00","vendor":"Edelbrock","type":"Intake Manifolds, Carbureted","tags":["Brand:Edelbrock","Carburetor Mounting:4BBL Square Bore","Carburetor Quantity:One","Engine:Chevy - V8 (6.2L) 2008-14 LS3","Intake Manifolds Carbureted","Intake Material and Finish:Natural Aluminum","Intake Style:Single Plane","RPM Range:3500-7500"],"price":49395,"price_min":49395,"price_max":49395,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23281034199098,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EDE2826","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Edelbrock 2826 Super Victor Intake Manifold Chevy - V8 (6.2L) 2008-14 LS3","public_title":null,"options":["Default Title"],"price":49395,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"085347028269","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2826.jpg?v=1559414318"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2826.jpg?v=1559414318","options":["Title"],"media":[{"alt":null,"id":2090948460602,"position":1,"preview_image":{"aspect_ratio":1.603,"height":156,"width":250,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2826.jpg?v=1559414318"},"aspect_ratio":1.603,"height":156,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2826.jpg?v=1559414318","width":250}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eDesigned for Gen IV LS engines equipped with LS3 cylinder heads, these new Super Victor intake manifolds are ideal for anyone building a 700+ hp carbureted or EFI large displacement racing engine operating between 3,500 - 7,500 rpm.\u003c\/p\u003e\n\u003cp\u003eThese new Super Victor intake manifolds are designed with 24% larger runners than our Victor Jr. #28457 along with a larger 4500 style plenum. The large plenum makes these intake manifolds ideal for nitrous and forced induction applications. They also feature tapered runners for increased flow at high rpm. Available with a 4150 or 4500 series carburetor flange. The Super Victor 4500 series manifolds can accommodate bores up 2.25\". Super Victor #28215 and #28265 include machined fuel injector bosses. A carburetor mounted style throttle bracket is recommended.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Section Included:Complete\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngine Block Style:Stock\/OEM standard deck\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarburetor Quantity:One\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Style:Single plane\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBasic Operating RPM Range:3,500-7,500\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Manifold Height:7.670 in.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Finish:Natural\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Material:Aluminum\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEGR:No\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:Sold individually.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eEdelbrock Super Victor intake manifolds are arguably the most popular and flexible manifolds in racing today. You'll find these single-plane manifolds on oval tracks, in drag racing, and on NASCAR engines--anywhere that maximum horsepower and torque are needed. The extended, constant cross-sectional area of the runners produces more torque across the midrange--from 3,500 up to 8,500 rpm in most instances. So, they deliver great throttle response off of the corners in oval track racing and improved 60 ft. times in drag racing. Their direct \"line-of-sight\" flow path provides maximum flow and there's plenty of material for port matching. They're also ideal for alcohol use.\u003c\/p\u003e"}

{"id":2440369700922,"title":"Edelbrock 2915 Victor Intake Manifold Mopar - V8 (318-360) 1966-91 \"LA\" Series","handle":"ede-2915-edelbrock","description":"\u003cp\u003eVictor 340 is designed for 340-360 c.i.d. Chryslers using standard rectangular-port heads. For oval track and drag race engines operating from 3500-8000 rpm. Can be used on 318 c.i.d. engines with 340-360 heads. Intake manifold will not fit 1992 and later Magnum engines. Accepts 1975 and earlier waterneck only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Section Included:Complete\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngine Block Style:Stock\/OEM standard deck\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarburetor Quantity:One\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Style:Single plane\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBasic Operating RPM Range:3,500-8,000\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Manifold Height:4.920 in.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Finish:Natural\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Material:Aluminum\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEGR:No\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:Sold individually.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:Must use 1975 or earlier waterneck\u003c\/strong\u003e\u003c\/p\u003e","published_at":"2019-06-01T13:08:57-05:00","created_at":"2019-06-01T13:08:57-05:00","vendor":"Edelbrock","type":"Intake Manifolds, Carbureted","tags":["Brand:Edelbrock","Carburetor Mounting:4BBL Square Bore","Carburetor Quantity:One","Engine:Mopar - V8 (318-360) 1966-91 \"LA\" Series","Intake Manifolds Carbureted","Intake Material and Finish:Natural Aluminum","Intake Style:Single Plane","RPM Range:3500-8000"],"price":45695,"price_min":45695,"price_max":45695,"available":false,"price_varies":false,"compare_at_price":null,"compare_at_price_min":0,"compare_at_price_max":0,"compare_at_price_varies":false,"variants":[{"id":23281033216058,"title":"Default Title","option1":"Default Title","option2":null,"option3":null,"sku":"EDE2915","requires_shipping":true,"taxable":true,"featured_image":null,"available":false,"name":"Edelbrock 2915 Victor Intake Manifold Mopar - V8 (318-360) 1966-91 \"LA\" Series","public_title":null,"options":["Default Title"],"price":45695,"weight":0,"compare_at_price":null,"inventory_management":"shopify","barcode":"85347029150","requires_selling_plan":false,"selling_plan_allocations":[]}],"images":["\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2915.jpg?v=1559414980"],"featured_image":"\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2915.jpg?v=1559414980","options":["Title"],"media":[{"alt":null,"id":2090954227770,"position":1,"preview_image":{"aspect_ratio":1.374,"height":182,"width":250,"src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2915.jpg?v=1559414980"},"aspect_ratio":1.374,"height":182,"media_type":"image","src":"https:\/\/cdn.shopify.com\/s\/files\/1\/0098\/2587\/8074\/products\/2915.jpg?v=1559414980","width":250}],"requires_selling_plan":false,"selling_plan_groups":[],"content":"\u003cp\u003eVictor 340 is designed for 340-360 c.i.d. Chryslers using standard rectangular-port heads. For oval track and drag race engines operating from 3500-8000 rpm. Can be used on 318 c.i.d. engines with 340-360 heads. Intake manifold will not fit 1992 and later Magnum engines. Accepts 1975 and earlier waterneck only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Section Included:Complete\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEngine Block Style:Stock\/OEM standard deck\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarburetor Quantity:One\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Style:Single plane\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBasic Operating RPM Range:3,500-8,000\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Manifold Height:4.920 in.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Finish:Natural\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIntake Material:Aluminum\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEGR:No\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eQuantity:Sold individually.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNotes:Must use 1975 or earlier waterneck\u003c\/strong\u003e\u003c\/p\u003e"}